From Documentation
Revision as of 17:01, 2 April 2013 by Roberpj (Talk | contribs) (Example Job)

Jump to: navigation, search
OCTAVE
Description: Mostly compatible language with Matlab primarily intended for numerical computations
SHARCNET Package information: see OCTAVE software page in web portal
Full list of SHARCNET supported software


Introduction

Octave is provided on sharcnet to allow serial or threaded jobs to be run in the queue as described below.

Usage

Version Selection

To see what versions of Octave are available on sharcnet clusters consult the Availability table on the sharcnet OCTAVE web portal software page OR run the following command directly on a cluster:

module avail octave

Starting with version 3.6.3 its necessary to first unload the intel compiler module (or any other compiler that might be loaded) before loading the Octave module. This is done to ensure any octave-forge packages that are to be downloaded and installed into user space are built with the native gcc compiler which is version 4.4.6 at the time of this writing. Therefore to load octave/3.6.3 one would do:

module unload intel
module load octave/3.6.3

Job Submission

On SHARCNET clusters Octave should only be run via the queuing system. Octave serial jobs can be submitted to the serial queue using following sqsub command:

sqsub -r 60m -o ofile.%J octave mycode.m

As of version 3.4.3 the sharcnet octave installation supports multi-threading which based on initial testing lapack/blas intensive octave jobs run in the threaded queue achieve an order of magnitude speedup compared to running single core jobs in the serial queue, without making any changes to your code. Once the optimal number of processors is determined by scaling tests submit the job to the threaded queue for example:

sqsub -r 60m -n 8 -q threaded --mpp=1G -o  ofile.%J time octave mycode.m

Example Job

An example job complete with sample .m will be provided here asap. For now please refer to the sqsub command shown in the previous job submission section.

General notes

Matlab Compatibility

The online wiki resources "Octave Wiki":

http://wiki.octave.org/  

or "Wikibook":

http://en.wikibooks.org/wiki/MATLAB_Programming/Differences_between_Octave_and_MATLAB 

provide good introductory explanations of code compatibility between Octave and Matlab.

Reading/Writing Files

There are two strategies for handling file input and output described in the "Octave manual" viz ...
http://www.gnu.org/software/octave/doc/interpreter/Input-and-Output.html#Input-and-Output
http://www.gnu.org/software/octave/docs.html.

The following stanza demonstrates the "simple file I/O" approach: http://www.gnu.org/software/octave/doc/interpreter/Simple-File-I_002fO.html#Simple-File-I_002fO

save myiofile.dat A B C
save ("-text", "myiofile.dat", "A", "B", "C")
save ("-binary", "myiofile.dat", "A", "B", "C")
load myiofile.dat
load ("-text", "myiofile.dat", "A", "B", "C")
load ("-binary", "myiofile.dat", "A", "B", "C")

where A, B and C are a potential mix of entities such as scalars, vectors or matrices. Note that for large files the binary format is strongly recommended to both minimize disk space and file read/write wallclock times.

Large Memory Array Allocation Testing

The following command sequence should successfully run on hound or tope. Since tope is recommended for interactive use and has 32gb of memory the test will be demonstrated there:

[mypc ~] ssh tope.sharcnet.ca

[tope ~] module load octave/3.4.0

[tope ~] octave
GNU Octave, version 3.4.0
octave:3> N=4e8; A=[1:N]; B=[2*(1:N)]; C=A+B; C(1);  C(N); 3*N 
ans =  1.2000e+09
octave:4> exit

Octave-Forge Package Management

Octave-forge packages are NOT pre-installed on sharcnet systems. Users must therefore download, install then manage the versions needed for their research. An explanation of howto handle this task is provided within this section:

DOWNLOADING AND INSTALLING PACKAGES

The "Octave Forge" http://octave.sourceforge.net/ project provides extra packages for use with octave that can be downloaded into a directory such as ~/my_octave_sources then manually installed into your own sharcnet account as will be shown in the follow example. A current list of packages available for download that notable are generally only compatible with the latest major release of octave cat be found here http://octave.sourceforge.net/packages.php.

In the event where the major version of octave on sharcnet you are using (for instance 3.4.x) is not the same as latest major version (at the time of writing 3.6.x) and there were programming api changes between the two versions that effect the package you want to use, then you probably will need to download an older version of a package from http://sourceforge.net/projects/octave/files/Octave%20Forge%20Packages/Individual%20Package%20Releases/. for it to work.

To help estimate the package version required as a starting point, consider the major release dates of recent which are octave-3.4.3 (10/10/11), octave-3.6.0 (01/15/12), octave-3.6.1 (02/22/12) and finally octave-3.6.2 (05/31/12). Next consider you want to download the latest geometry package that was compatible with octave-3.4.3 at the time of its release, then simply display all the archived versions as shown in the following stanza and pick the last available geometry release date before the next major release octave-3.6.0 (01/15/12). To show a list of all archived geometry versions, do the following steps:

http://octave.sourceforge.net/
Click Packages on top menu menu bar
Scroll down to the miscellaneous package row and click details
Click (older versions) located below "Download Package"
Click Octave Forge Packages
Click  Individual Package Releases
Please wait for the page to load ...
Click "Name" at the top of first colum to sort packages alphabetically
Scroll down you will find all available archived geometry packages:
 geometry-1.0.1.tar.gz  2011-09-27
 geometry-1.1.1.tar.gz  2011-10-06
 geometry-1.1.2.tar.gz  2011-10-09
 geometry-1.1.3.tar.gz  2011-10-13
 geometry-1.1.tar.gz    2011-10-04
 geometry-1.2.0.tar.gz  2011-10-22
 geometry-1.2.1.tar.gz  2011-11-02
 geometry-1.2.2.tar.gz  2011-11-04
 geometry-1.4.0.tar.gz  2012-01-25
 geometry-1.4.1.tar.gz  2012-03-24
 geometry-1.5.0.tar.gz  2012-06-05

Therefore you will download geometry-1.2.2.tar.gz (2011-11-04) since the next release geometry-1.4.0.tar.gz (2012-01-25) and then install it into octave 3.4.3 as follows:

[roberpj@tope:~/my_octave_sources] octave
GNU Octave, version 3.4.3
octave:1> pkg install geometry-1.2.2.tar.gz
octave:2> pkg list
Package Name   | Version | Installation directory
---------------+---------+-----------------------
     geometry  |   1.2.2 | /home/roberpj/octave/geometry-1.2.2
octave:15> pkg load geometry
octave:16> pkg describe geometry
---
Package name:
        geometry
Version:
        1.2.2
Short description:
        Library for geometric computing extending MatGeom functions. Useful to create,
transform, manipulate and display geometric primitives.
Status:
        Loaded

Note: Any questions regarding package version compatibility with major or minor octave release should be referred to the developers.

ADDITIONAL EXAMPLES OF PACKAGE COMMANDS

For demonstration purpose linear-algebra will first be downloaded:

[roberpj@iqaluk:~] mkdir my_octave_sources
[roberpj@iqaluk:~] cd my_octave_sources
  wget http://downloads.sourceforge.net/octave/general-1.3.2.tar.gz
  wget http://downloads.sourceforge.net/octave/linear-algebra-2.2.0.tar.gz
[myusername@orc-login1:~]octave
octave:1>  help pkg

To install a package such as linear-algebra do:

octave:2>  cd ~/my_octave_sources
octave:3>  pkg install  general-1.3.2.tar.gz
octave:4>  pkg install linear-algebra-2.2.0.tar.gz

To remove a package, from a terminal first do:

cd ~/octave
rm -rf linear-algebra-2.2.0

... then from within octave do:

octave:5>  pkg uninstall linear-algebra

To list all installed packages do:

octave:6>  pkg list

To add a named packages to your path:

octave:7>  pkg load name

To remove a named package from your path:

octave:8>   pkg unload

To list all functions provided by a package:

octave:9>  pkg describe -verbose all

To list functions provide by extra odepkg package:

octave:10>  pkg describe odepkg

To list functions details for extra financial package:

octave:11>  pkg describe financial -verbose

To get documentation for a topic such as sin do:

octave:12>   doc sin

To get help using the doc command do:

octave:13>   help doc

To get documentation for a topic such as matrix do:

octave:14>  doc matrix

To get documentation for any topic run the doc command alone:

octave:15>  doc

A COMPLETE PACKAGE EXAMPLE

This example assumes you first create two directories in your home account one being named

 ~/my_octave_packages  

and the other

 ~/my_octave_sources 

then download the required three tar.gz files into the latter from

http://octave.sourceforge.net/packages.php ...
[roberpj@orc-login1:~] module unload octave
[roberpj@orc-login1:~] module load octave
[roberpj@orc-login1:~] octave
GNU Octave, version 3.4.3
octave:1> pkg prefix ~/my_octave_packages
ans = /home/roberpj/my_octave_packages
octave:2> cd my_octave_sources
octave:3> ls
miscellaneous-1.0.11.tar.gz  optim-1.0.17.tar.gz   struct-1.0.9.tar.gz
octave:4> pkg install miscellaneous-1.0.11.tar.gz  optim-1.0.17.tar.gz struct-1.0.9.tar.gz
octave:5> pkg list
Package Name   | Version | Installation directory
---------------|---------|-----------------------
miscellaneous *|  1.0.11 |  /home/roberpj/my_octave_packages/miscellaneous-1.0.11
       optim *|  1.0.17 |  /home/roberpj/my_octave_packages/optim-1.0.17
      struct *|   1.0.9 |  /home/roberpj/my_octave_packages/struct-1.0.9</PRE>

References

o Octave Homepage
http://www.gnu.org/software/octave/

o Octave 725 Page Manual (Version 3.4.0)
http://www.gnu.org/software/octave/doc/interpreter/

o Statistic Package Function Reference
http://octave.sourceforge.net/doc/funref_statistics.html

o GNU Octave Wiki
http://wiki.octave.org/

o Matlab-Like Tools for HPC (article)
http://www.admin-magazine.com/HPC/Articles/Matlab-Like-Tools-for-HPC