[Fluent Inc. Logo] return to home search
next up previous contents index

7.10.4 Other Inputs at Outflow Boundaries



Radiation Inputs at Outflow Boundaries


In general, there are no boundary conditions for you to set at an outflow boundary. If, however, you are using the P-1 radiation model, the DTRM, the DO model, or the surface-to-surface model, you will set the Internal Emissivity and (optionally) Black Body Temperature in the Outflow panel. These parameters are described in Section  13.3.15. The default value for Internal Emissivity is 1 and the default value for Black Body Temperature is 300.



Defining Discrete Phase Boundary Conditions


If you are modeling a discrete phase of particles, you can set the fate of particle trajectories at the outflow boundary. See Section  22.13 for details.


next up previous contents index Previous: 7.10.3 Mass Flow Split
Up: 7.10 Outflow Boundary Conditions
Next: 7.11 Outlet Vent Boundary
© Fluent Inc. 2006-09-20