Adapt/Yplus/Ystar... menu item opens the
Yplus/Ystar Adaption panel.
Yplus/Ystar Adaption Panel
Yplus/Ystar Adaption panel allows you to mark or adapt boundary cells on specified wall zones based on the non-dimensional
parameter. See Section
26.9 for details.
contains the check buttons that toggle the ability to mark and/or adapt cells for refinement or coarsening.
toggles the ability to refine cells or mark cells for refinement.
toggles the ability to coarsen cells or mark cells for coarsening.
contains the check buttons that enable adaption based on
contains a selectable list of active wall zones. Boundary cells associated with the wall zones you select will be marked or adapted based on the options, thresholds, and limitations applied in the panel.
displays the minimum and maximum cell values of
for all cells associated with viscous wall zones. Note that these values are independent of the wall zones selected. The real number field values are not editable; they are purely informational.
designates the threshold value for coarsening the grid. Cells with
values below the minimum threshold will be marked for coarsening.
designates the threshold value for refining the grid. Cells with
values above the maximum threshold will be marked for refinement.
Manage Adaption Registers panel, which allows you to display and manipulate adaption registers that are generated using the
adapts the grid based the coarsening and refining toggle buttons, the wall zones selected, the minimum and maximum
allowed, and the adaption limits.
marks cells to be refined and/or coarsened based on the wall zones selected and the minimum and maximum
allowed in the grid. This command produces an adaption register. For information on using adaption registers, see Section
computes the minimum and maximum values of
on all cells on viscous walls and displays them in the
Max real number fields. Note that these are the extremes for the
values of every cell on a viscous wall, not just the cells associated with the selected zones.